Micro-Ohmmeter Model 6250
27
• Delete the selected object by rst pressing the ► button and
toggling between Yes “dEL. Y” or No “dEL. n”
• Pressing the ► button while “dEL. Y” is in the display will delete
the contents of the selected object. The display will momentarily
display dashes “-----” and then return to display the next highest
object location.
• Pressing the ► button while “dEL. n” is in the display will cancel
the request.
• Repeat this process for each object to be deleted.
• To clear the entire memory contents, turn the rotary switch to the
SET-UP position.
• Press the ▲ button until “nEn” appears on the top line of the
display.
• Press the ► button, “dEL” will appear on the lower line of the
display.
• Delete all data from memory by rst pressing the ► button, then
toggling between Yes “dEL. Y” or No “dEL. n”
• Pressing the ► button while “dEL. Y” is in the display will clear all
memory of stored measurements.
• Pressing the ► button while “dEL. n” is in the display will cancel
the request.
NOTE: Only objects with data stored in them can be accessed.
To return to the beginning of the SET-UP menu, press the ▲ button when
“nEn” is on the top line of the display
w ww . . co m
information@itm.com1.800.561.8187
To Next Page
Loading...
