48
Micro-Ohmmeter Model 6250
Figure 6-2
12. In the Ready to Install the Program window, click on Install.
13. If the instrument selected for installation requires the use of a USB
port, a warning box will appear, similar to Figure 6-3. Click OK.
Figure 6-3
NOTE: The installation of the drivers may take a few moments. Windows
may even indicate that it is not responding, however it is running. Please
wait for it to finish.
14. When the drivers are nished installing, the Installation Successful
dialog box will appear. Click on OK.
15. Next, the Installation Wizard Complete window will appear. Click on
Finish.
16. A Question dialog box appears next. Click Yes to read the procedure
for connecting the instrument to the USB port on the computer.
w ww . . co m
information@itm.com1.800.561.8187
To Next Page
Loading...
