AEQ XPEAK
IP Intercom System
23
Long pressing the "PAGE (MENU)" key leaves the
operation screen, taking us to the device’s setup
menus. Some frequently used options can be
found, while other are for configuration.
In configuration mode, the right screen will show a
remainder about how to operate the menus: press
the "PAGE (MENU)" to go back, press the encoder
button to accept and turn the encoder knob to
navigate throughout the menu options.
The left screen shows the different available menu options.
The first menu level includes the following five options:
By turning the encoder, we can select any of them. Press the encoder button to enter the
selected option. Pressing "PAGE (MENU)" takes you back in the menu and repeating the key
press takes you back to the operation screen.
To Next Page
Loading...