AEQ XPEAK User Manual

AEQ XPEAK
IP Intercom System
57
4.2.2. Software configuration.
As previously indicated, the button gives access to the application settings window:
The application version is shown at the top of the "Settings" window. Below is the internal
identifier of the application in the system.
Next, the "Change Name" button allows you to change the name that identifies the "Xpeak
Virtual" application in the system. Pressing on it enables the edit box on the right (and disables
everything else), allowing the name to be modified:

AEQ XPEAK Specifications

General

Brand	AEQ
Model	XPEAK
Category	Intercom System
Language	English