AEQ XPEAK
IP Intercom System
29
When in these operating modes, the first menu shows two specific functions:
• "Reject": It allows to cut off a communication. If a remote panel has
established communication with our panel and we want to "hang up"
that "call" this option should be used. When selecting it by pressing the
encoder, the displays return to the operation screen, where the key
whose communication you want to cut off is selected.
Then the key will be disabled both in the source panel of the
communication and in the destination panel.
• "Mute Key": The functionality is the same as defined in section 3.1.1.1.
3.1.6.3. EasyNET and EasyNET G722 modes.
They are 4-channel Party-Line modes, so in operating mode there are only 4 active keys, the
ones associated to the left screen.
To Next Page
Loading...
Need help?
General