AEQ XPEAK User Manual

AEQ XPEAK
IP Intercom System
35
• Gateway: IP address of the gateway to external networks. It is
configured just in the same way as the beltpack’s IP address.
• DNS: IP address of the Domain Name Server to be used. It is
configured just in the same way as the beltpack’s IP address.
3.2.4. "Options" menu.
Gives access to a test option
where the 2 encoders and the
keys and LEDs of the unit's
front can be checked.
3.2.5. "Info" menu.
By pressing the "PAGE (MUTE)" key when the "Info"
option is visible on the screen, you enter this menu
that allows us to check the main configuration
parameters of the beltpack and that presents the
following options:
• Network: Allows us to check the network configuration of the beltpack.
The fields that appear are: MAC address, IP address, mask, gateway
and DNS. In section 3.2.3 the way to configure all these parameters is
detailed.
In addition, the Inet (indicates if there is an Internet connection) and
VPN (indicates if the unit is connected to the AEQ VPN service) fields
appear.
• About: Allows us to check the operative system version, the firmware
version, the serial number and unit's type.

AEQ XPEAK Specifications

General

Brand	AEQ
Model	XPEAK
Category	Intercom System
Language	English