AEQ XPEAK
IP Intercom System
49
3.4.3. "Info" menu.
By pressing the encoder when the "Info" option is
visible on the screen, you enter this menu that allows
us to check the main configuration parameters of the
interface and that presents the following options:
• Network: Allows us to check the network configuration of the interface.
The fields that appear are: MAC address, IP address, mask, gateway
and DNS. In section 3.4.1 the way to configure all these parameters is
detailed.
In addition, the Inet (indicates if there is an Internet connection) and
VPN (indicates if the unit is connected to the AEQ VPN service) fields
appear.
• About: Allows us to check the operative system version, the firmware
version, the serial number and unit's type.
To Next Page
Loading...
Need help?
General