AEQ XPEAK
IP Intercom System
7
2. If you use unmanaged switches, do not use those that support the EEE function,
because you cannot disable that option in these switches.
1.1.3. Devices comprising the system.
The system is composed by the following terminals:
• Xpeak_R: Rackmount User Panel.
• Xpeak_D: Desktop User Panel.
• Xpeak_BP: Wired Beltpack.
• Xplorer beltpack now offers a working mode specially designed to integrate with Xpeak.
• Xpeak Virtual: App for PC.
• Xpeak_IF: I/O Interface.
1.1.4. Operating modes.
• Xpeak specific modes:
o Virtual Matrix Mode: A matrix-less system is configured on Xpeak panels and
beltpacks. It is compatible with Xplorer wireless system, were keys (8 in
stationary devices and 4 in the beltpacks) are programmed with the same
flexibility found in AEQ-KROMA matrix-based systems. Max capacity of this
matrix is up to 28 panels. Audio quality is 7 kHz HD-voice.
o Party-Line HD mode: A Party-Line system is configured on Xpeak panels and
beltpacks, offering 4 channels and compatible with Xplorer wireless system.
Through 4 keys, each terminal’s talk destination and listening source can be
selected. Audio quality is 7 kHz HD-voice.
• Legacy modes:
o CrossNET mode: Xpeak panels turn into 8-key CrossNET user panels, and
Xpeak_BP turns into a 4-key one. Audio quality is Kroma G711.
o Conexia mode: Xpeak panels turn into 8-key Conexia user panels, and
Xpeak_BP turns into a 4-key one. Audio quality is 7 kHz HD-voice.
To Next Page
Loading...
Need help?
General