AEQ XPEAK
IP Intercom System
6
• Virtual network architecture allows a device to subscribe to different virtual networks on
demand as needed.
• The system and its elements are compatible with previous intercom systems bearing
the AEQ and KROMA brands.
• System is configured from the user panels themselves. There is also an optimized
configuration tool, online and offline, for the most complex environments.
• With common user terminal architectures: stationary, desktop, wired beltpack, wireless
beltpack and PC application.
• The wired user terminals support USB and Bluetooth headsets from the most basic, to
the highest quality and best features.
• Rack and desktop equipment will use 4-way levers instead of keys, for easier operation
of basic functions: Listen, Talk, and adjust the receive volume.
• Additional equipment is included to provide analog, digital and IP audio inputs and
outputs to the system.
• The equipment has been designed to be very cost effective with optimum performance.
• Great audio quality (HD Voice up to 7 kHz) with bit rate limited to 64 kbps.
• The system can exchange RTP / G722 streams with audiocodecs.
IMPORTANT NOTE: It is not possible to use switches or devices with EEE (Energy Efficient
Ethernet or Green Ethernet) enabled in networks with Xpeak equipment. Therefore, it is
recommended that:
1. If you use managed switches, ensure that they allow EEE to be disabled. Make sure
that EEE is disabled on all ports used for Xpeak system.
To Next Page
Loading...
Need help?
General