AEQ XPEAK User Manual

AEQ XPEAK
IP Intercom System
40
• SSID: This option allows to type or modify the name of the WiFi network that the terminal
has to connect to.
There are 4 options associated to keys 1 to 4:
- DEL: Allows to delete the last character.
- INSERT: Allows to add a new character at the end. After pressing the key the character
is configured by turning any of the two encoders.
- DEL ALL: Allows to delete all characters.
- ABCD: Allows to switch between uppercase letters, lowercase letters, numbers and
special characters.
By pressing "OK" (right function key) the typed name is validated. By pressing "CANCEL"
(left function key) changes are ignored and the former name will remain.
• Password: Use this option to type or modify the password of the WiFi network that the
terminal has to connect to. The procedure is the same as for creating or editing the name.
• Hidden SSID: This options should be checked if the WiFi network the terminal will connect
to is hidden (it doesn't publish its SSID).
• Config IP: Allows us to configure the IP parameters of the terminal.
The following options appear:

AEQ XPEAK Specifications

General

Brand	AEQ
Model	XPEAK
Category	Intercom System
Language	English