AERMEC VMF-E5 User Manual

6
GB
6795773_01
VMF system - Guidelines for system
As specifi ed in the introduction, this manual will guide the installer for the correct implementation of a VMF system
based on a practical comprehensive example.
1
Management of 5 distinct zones thus divided:
A
A NIGHT zone (composed of two rooms) where a ducted INVERTER unit is installed, making it possible to control the
unit by a wall-mounted panel as well as by a centralised panel.
B
A second NIGHT zone where a fan coil unit is installed, making it possible to control the units by a wall-mounted panel
as well as by a centralised panel.
C
A DAY zone where a fan coil unit is installed, making it possible to control the units by controls on-board the machine
as well as by a centralised panel.
D
A DAY zone where fan coils are installed, making it possible to control the units by controls on-board the machine
as well as by a centralised panel.
E
A second DAY zone where fan coils are installed, making it possible to control the units by controls on-board the
machine as well as by a centralised panel.
2
Management of an INVERTER heat pump.
3
Management of domestic hot water production with integration by an electric resistance.
4
Management of a heat recovery unit and an air quality probe.
Zone
A
Zone
A
Zone
E
Zone
C
Zone
B
Zone
D
Division of rooms by zone:

AERMEC VMF-E5 Specifications

General

Brand	AERMEC
Model	VMF-E5
Category	Control Unit
Language	English