Film types
Film type Film base Application Film sizes
Average opti-
cal density
(X-Rite 310
densitometer)
Original Agfa
branded Dry-
star film
blue-trans-
parent
General Ra-
diography
8x10”, 10x12”,
11x14”,
14x14”, and
14x17”
3.2
clear-
transpar-
ent
3.0
The printer has 2 input trays. Both trays can handle all listed film types and
formats.
When a new film pack is loaded, the Film Identification tag is read and the
printer settings are automatically adjusted.
The Key-operator can overrule the film settings for the input tray.
Labeling the input trays
Note: If you want to change the film format, the tray
configuration must be modified.
Appropriate labels have been applied on the input tray(s) by the service
personnel at installation of the printer, indicating the type of new film to be
loaded when the tray is empty.
Drystar 5301, Drystar 5302 | Drystar 5301, Drystar 5302 | 11
2831F EN 20210601 1655
To Next Page
Loading...
