Basic Operation (operator mode)
This section focuses on the basic operating principles of the printer. After
reading this chapter, the operator should be able to produce diagnostic usable
hardcopies. No special technical skills are required.
All basic operator functions can be activated directly by pressing a single key
on the keypad.
Function / Task
Description
‘Pausing the print queue’ To pause the print queue. The printer will finish
the current print job, but will not start the next
print job.
‘Viewing the film count info’ To view the number of films left in the trays.
‘Viewing the printer status’ To view the current events.
Topics:
• Managing the print queue
• Pausing the print queue
• Viewing the film count info
• Viewing the printer status
• Deleting print jobs
• Changing the film format of the trays
• Loading films
72 | Drystar 5301, Drystar 5302 | Basic Operation (operator mode)
2831F EN 20210601 1655
To Next Page
Loading...
