Messages
Under certain conditions the red LED on the right side of the display lits up
and a warning or error message is shown on the display. This message informs
the user that either a problem has occurred or that a requested action cannot
be performed.
Color / Light Status Action
Red Blinking Warning status Check the display for messages.
Constant Error status
The user must read these messages carefully. It will provide information on
what to do from then on. This will be either performing an action to resolve
the problem or to contact your local service organization. Details on the
contents of messages can be found in the service documentation which is
available to service personnel.
58 | Drystar 5301, Drystar 5302 | Introduction
2831F EN 20210601 1655
To Next Page
Loading...
