1 Lift printer from pallet with 3 persons.
3 Put printer on a table. Always put tray
side at front.
2 If only 2 persons are available, lift as
shown below.
2 If only 2 persons are available, lift as
shown below.
Figure 2: Transport possibilities
Transporting the printer
1. Switch off the printer.
2. Disconnect the cables.
3. Move the printer to its destination (with 2, preferably 3 persons!).
4. Reconnect the cables.
5. Switch the printer on.
Drystar 5301, Drystar 5302 | Introduction | 31
2831F EN 20210601 1655
To Next Page
Loading...
