• Only (alpha) numerical data can be entered.
• During data entry, the field is displayed in reverse mode.
• Increment the number in a(n) (alpha) numerical entry field by pressing
the Up key. Transition from 9 to 0 of one figure will also increment the
next figure to the left, respecting the valid limits of the range.
• Decrement the number in a(n) (alpha) numerical entry field by pressing
the Down key. Transition from 0 to 9 of one figure will also decrement the
next figure to the left, respecting the valid limits of the range.
• Move the entry position in a(n) (alpha) numerical entry field from right to
left by pressing the Left key.
• Move the entry position in a(n) (alpha) numerical entry field from left to
right by pressing the Right key.
• Press and hold down a key to repeat arrow key actions.
• To accept an entry in a menu, press the Confirm key.
• A short beep acknowledges and terminates the entry.
• The printer will sound a long beep if you press a key that is not to be used
at that moment.
Drystar 5301, Drystar 5302 | Introduction | 67
2831F EN 20210601 1655
To Next Page
Loading...
