Agilent Technologies 7000 Triple Quadrupole GC/MS User Manual

196 Troubleshooting and Maintenance Manual
9 Replacement Parts
Table 17 shows the replacement parts for the analyzers. Analyzer screws
(Table 18) and the individual ion source parts (Table 19) are listed in the
tables that follow.
Table 1 7 Analyzer parts
Item Description Part number
Front quad Rear quad
Feedthrough board (source board) G7000-6525
HED feedthrough G1099-80012
O-ring, Viton for HED feedthrough 0905-0490 0905-0490
6 Magnet assembly 05971-60160
Low gauss magnet assembly G3163-60560
Mass filter cable kit G3170-60130
Mass filter contacts (4) G1099-60142 G1099-60142
Mass filter canted coil support, detector end G3170-20025
Mass filter canted coil spring G1460-2724
Mass filter ceramic support, source end G1099-20123
3 Mass filter heater assembly G7000-60172
Pins for source and detector end mounting
brackets
G1099-20137
Quad mount detector G7000-20043
Quad mount grnd quad G7000-20225 G7000-20225
Analyzer with Inert ion source, new G7000-65006
Analyzer with Inert ion source, rebuilt G7000-69006
Analyzer with HED detector, new G7000-65003
Analyzer with HED detector, rebuilt G7000-69003
Analyzer with HED detector with iris, new G7000-65703
Analyzer with HED detector with iris, rebuilt G7000-69703
Front side plate G7000-60021
Rear side plate G7000-60022

Agilent Technologies 7000 Triple Quadrupole GC/MS Specifications

General

Brand	Agilent Technologies
Model	7000 Triple Quadrupole GC/MS
Category	Laboratory Equipment
Language	English