Agilent Technologies 709-DS User Manual

36 708-DS / 709-DS Operator’s Manual
3 Setting Up the 708-DS / 709-DS
Figure 13 Connecting AutoTemp
6 If the unit is equipped with autosampling, locate the black sample
tubing fasteners and attach the fastener to the sample tubing wrap.
7 If applicable, affix the fasteners to the underside of the drive unit. A
fastener is affixed to the left and to the right of the center drive unit
lift.

Agilent Technologies 709-DS Specifications

General

Brand	Agilent Technologies
Model	709-DS
Category	Laboratory Equipment
Language	English