58 708-DS / 709-DS Operator’s Manual
4 Operating the 708-DS / 709-DS
active method. The Pause Method button allows for media change
during a dissolution test. If you select Pause Method, the Method
Paused screen displays:
When a method is paused, the system takes the following actions:
• The spindles stop.
• If Full Media Change has been selected as a method parameter,
the elapsed time counter stops counting.
• A Pause Elapsed Time counter starts counting. If the paused time
exceeds the time specified in the Pause Duration Alarm, the
Alarm warning screen displays. See “Pause Duration Exceeded”
on page 110.
To Next Page
Loading...
Need help?
General
