Applications Working with Application Graphs
240 Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Sixth Edition
5 If you want to assign marker B to another curve, press the [B] softkey, use the
cursor key to move to the legend number of the curve to which you want to lock
marker B, and press Enter.
6 Press Close to return to the graph.
How to Unlock Markers from the Curve
You can unlock markers A and B from the curve by performing the
following instructions:
1 Press the [Menu] softkey.
2 Move to <Unlock From Curve> and press Enter to return to the graph.
How to Lock/Unlock Markers to Samples
You can choose to lock the markers to samples, that is, the results that are
returned are actual measurement results.
Figure 143 shows a graph where markers A and B are locked to samples.
If you press the cursor key, the marker will move to another sample.
Figure 143 Lock to Samples On
Figure 144 shows a graph where markers A and B are not locked to
samples. If you press the cursor key, the marker will move along the curve.
To Next Page
Loading...
Need help?
General
