AC Line Power Supply Requirements Installation and Maintenance
Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Sixth Edition 291
AC Line Power Supply
Requirements
Line Power Requirements
The Agilent 8163A/B Lightwave Multimeter System complies with
overvoltage category II and can operate from the single-phase AC power
source that supplies between 100 V and 240 V at a frequency in the range
50 to 60 Hz.The maximum power consumption is 120 VA with all options
installed.
The Agilent 8164A/B Lightwave Measurement System complies with
overvoltage category II and can operate from any single-phase AC power
source that supplies between 100 V and 240 V at a frequency in the range
from 50 to 60 Hz. The maximum power consumption is 270 VA with all
options installed.
The Agilent 8166A/B Lightwave Multichannel System complies with
overvoltage category II and can operate from any single-phase AC power
source that supplies between 100 V and 240 V at a frequency in the range
from 50 to 60 Hz. The maximum power consumption is 450 VA with all
options installed.
To Next Page
Loading...
Need help?
General
