Agilent Technologies 8360 B Series User Manual

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
Auto Track
Function Group
POWER, USER CAL
Menu Map
5, 9
Description
This softkey optimizes the tracking of the swept signal generator's
output lter to the oscillator. Use it to maximize RF power output.
The swept signal generator displays: Peaking At: XXXXX MHz ,
where XXXXX represents frequency values. Peaking b egins at
the low frequency end and steps through to the high end of the
frequency range. Auto Track is complete when the display returns
to its original state. On swept signal generators without a step
attenuator provide a go o d source match on the RF connector. Use
apower sensor or a 10 dB attenuator. If a go o d source matchis
not provided, the swept signal generator can mistrac k b ecause of
excessive reections at the output.
Programming Codes
SCPI: CALibration:TRACk
Analyzer: SHRP
See Also
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Tracking Menu
\Optimizing Swept Signal Generator Performance" in Chapter 1
A-28 Operating and Programming Reference

Agilent Technologies 8360 B Series Specifications

General

Brand	Agilent Technologies
Model	8360 B Series
Category	Portable Generator
Language	English