4
ENTRY ON/OFF
5
Function Group
ENTRY
Menu Map
NONE
Description
This hardkey lets you turn o (blank) the active entry area and
disable the ARROWkeys, rotary knob, and entry keys. When
any function key (hard or soft) is pressed, the active entry area is
reactivated. The yellow LED, ENTRY ON, next to
4
ENTRY ON/OFF
5
indicates whether the entry area is active (LED on=active).
Programming Codes
SCPI:
No sp ecic code activates
4
ENTRY ON/OFF
5
Analyzer:
EF=o
See Also
Arrow Keys
\Entry Area" in Chapter 1
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
Ext Det Cal
Function Group
USER CAL
Menu Map
9
Description
This softkey enables the swept signal generator to act as a controller
to an HP/Agilent 437B power meter. This softkey causes an
immediate execute on the interface bus and generates an GPIB error
if no p ower meter is present on the interface bus or if the swept
signal generator is unable to address the power meter. Use external
detector calibration to characterize and compensate for an external
negative dio de detector used in an external lev
eling conguration.
Programming Codes
SCPI:
CALibration:PMETer:DETector:INITiate? DIODe
CALibration:PMETer:DETector:NEXT?
<
num
>
[lvl sux]
Analyzer:
NONE
See Also
\Optimizing Swept Signal Generator Performance" in Chapter 1
E-6 Operating and Programming Reference
To Next Page
Loading...
Need help?
General
