Equipment Supplied
All 8360 B-Series swept signal generators are sent from the factory
with the following basic accessories:
Rack handles (mounted)
Power cord
Software package
A set of manuals
The following adapters are also shipp ed with the swept signal
generators:
Table 3-1.
Adapter Descriptions and Part Numbers Shipped with
Each Agilent Swept Signal Generator Model
83620B/83622B/83623B/83624B/83630B
Typ e-N (F) to 3.5 mm (F) 1250-1745
3.5 mm (F) to 3.5 mm (F) 5061-5311
83640B/83650B
2.4 mm (F) to K (F) 1250-2187
2.4 mm (F) to 2.4 mm (F) 1250-2188
Options Available
There are several options available on the 8360 B-Series swept
signal generators. For descriptive information on all of the options
available, refer to Chapter 2c, \Specications". F
or installation
information on the rack mounting kits, refer to later paragraphs in
this chapter. For information on retrotting options, refer to the
\Option Retrots" chapter in the
Agilent Technologies 8360 B-Series
Swept Signal Generator/8360 L-Series Swept CW Generator Service
Guide
.
3-2 Installation
To Next Page
Loading...
Need help?
General
