Agilent Technologies 8360 B Series

NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Freq Offset
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
Freq Offset
Function Group
FREQUENCY
Menu Map
2
Description
This softkey lets you set a frequency oset value and applies it to
all frequency parameters. The frequency oset ranges between and
including 6 110.0 GHz. Changing the frequency oset value changes
the display but does not aect the output frequency.Frequency
multiplier and oset are related as shown by the following equation:
Entered value or Displayed Frequency = (Frequency Generated 2 Multiplier) + Oset value
The factory preset value is 0 Hz. An asterisk next to the key lab el
indicates that this feature is active.
Programming Codes
SCPI:
FREQuency:OFFSet < num > j MAXimum j MINimum
FREQuency:OFFSet:STATeON j OFF j 1 j 0
Analyzer: SHFB < n > [Hz j Kz j Mz j Gz j ]
See Also
FREQUENCY 4
MENU
5 ,
NNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Freq Mult
Operating and Programming Reference F-19