9-14 Programmer’s Guide
Introduction to SCPI
Syntax Summary
Syntax Summary
The following conventions are used throughout this manual whenever
SCPI mnemonics are being described.
angle brackets
(< >) are used to enclose required parameters within a
command or query. The definition of the variable is
usually explained in the accompanying text.
square
brackets ([ ]) are used to enclose implied or optional parameters
within a command or query.
UPPERlower
case are used to indicate the short form (upper-case) of a
given mnemonic. The remaining (lower-case) letters
are the rest of the long form mnemonic.
Figure 9-3 SCPI Command Syntax
To Next Page
Loading...
