11-4 Programmer’s Guide
SCPI Command Summary
SCPI Device Command Summary
SCPI Device Command Summary
NOTE This SCPI command reference is also available online. It is stored inside
your analyzer in electronic form. To use it, you must connect your
instrument to the network, and access it using your Web browser. See
the The LAN Interface User’s Guide Supplement for details.
NOTE Throughout this chapter, the following conventions are used:
• Square brackets ([ ]) are used to enclose a keyword that is
optional or implied when programming the command; that is, the
instrument will process the command to have the same effect
whether the option node is omitted or not.
• Parameter types (< >) are distinguished by enclosing the type
name in angle brackets.
• A vertical bar (|) can be read as “or” and is used to separate
alternative parameter options.
• UPPER-case letters (as found in the command MODify, for example)
are used to indicate the short form of a given mnemonic. The
remaining lower-case letters are the rest of the long form mnemonic.
Table 11-1 ABORt
SUBSYSTEM COMMANDS FORM DESCRIPTION
ABORt command
only
Aborts and resets the sweep in progress.
To Next Page
Loading...
Need help?
General
