Programmer’s Guide 10-9
Menu Map with SCPI Commands
Menu Map for 8712ET/ES and 8714ET/ES
Menu Map for 8712ET/ES and 8714ET/ES
Table 10-1 AVG Functions, 8712ES and 8714ES
1. The active measurement channel configuration determines the order of appearance and the
content of the softkey menus.
2. Option 100 (SRL and Fault Location) only.
3. Use with Delay format only.
KEYSTROKES
1
SCPI COMMAND
AVG (hardkey entry)
Average on OFF SENS[1|2]:AVER[ON|OFF];*WAI
Restart Average SENS[1|2]:AVER:CLE;*WAI
Average Factor SENS[1|2]:AVER:COUN <num>;*WAI
System Bandwidth (menu selection only)
Wide (6500 Hz) SENS[1|2]:BWID 6500 HZ;*WAI
Med Wide (4000 Hz) SENS[1|2]:BWID 4000 HZ;*WAI
Medium (3700 Hz) SENS[1|2]:BWID 3700 HZ;*WAI
Med Narrow (1200 Hz) SENS[1|2]:BWID 1200 HZ;*WAI
Narrow (250 Hz) SENS[1|2]:BWID 250 HZ;*WAI
Fine (15 Hz) SENS[1|2]:BWID 15 HZ;*WAI
Fault Window
2
(menu selection only)
Minimum SENS[1|2]:WIND RECT
Medium SENS[1|2]:WIND HAMM
Maximum SENS[1|2]:WIND KBES
Delay Aperture
3
(menu selection only)
Aperture (Hz)(enter value) CALC[1|2]:GDAP:SPAN 9950000 Hz;*WAI
Aperture (%)(enter value) CALC[1|2]:GDAP:APER <%/100>;*WAI
To Next Page
Loading...
Need help?
General
