Agilent Technologies 8712ET

To Next Page

To Previous Page

12-10 Programmer’s Guide

SCPI Conformance Information

Instrument Speciﬁc Commands

The following are instrument speciﬁc commands implemented by the 8712ET/ES and

8714ET/ES RF Network Analyzers which are not part of the present SCPI 1996.0 deﬁnition.

• CALCulate[1|2]:FORMat:UNIT:MLIN

• CALCulate[1|2]:FORMat:UNIT:MLIN?

• CALCulate[1|2]:FORMat:UNIT:MLOG

• CALCulate[1|2]:FORMat:UNIT:MLOG?

• CALCulate[1|2]:LIMit:DISPlay

• CALCulate[1|2]:LIMit:DISPlay?

• CALCulate[1|2]:LIMit:MARKer:FLATness:MAXimum

• CALCulate[1|2]:LIMit:MARKer:FLATness:MINimum

• CALCulate[1|2]:LIMit:MARKer:FLATness[:STATe]

• CALCulate[1|2]:LIMit:MARKer:FREQuency:MAXimum

• CALCulate[1|2]:LIMit:MARKer:FREQuency:MINimum

• CALCulate[1|2]:LIMit:MARKer:FREQuency[:STATe]

• CALCulate[1|2]:LIMit:MARKer:STATistic:MEAN:MAXimum

• CALCulate[1|2]:LIMit:MARKer:STATistic:MEAN:MINimum

• CALCulate[1|2]:LIMit:MARKer:STATistic:MEAN[:STATe]

• CALCulate[1|2]:LIMit:MARKer:STATistic:PEAK:MAXimum

• CALCulate[1|2]:LIMit:MARKer:STATistic:PEAK:MINimum

• CALCulate[1|2]:LIMit:MARKer:STATistic:PEAK[:STATe]

• CALCulate[1|2]:LIMit:MARKer:TILT:MAXimum

• CALCulate[1|2]:LIMit:MARKer:TILT:MINimum

• CALCulate[1|2]:LIMit:MARKer:TILT[:STATe]

• CALCulate[1|2]:LIMit:SEGMent[1|2|…12]:AMPLitude:STARt

• CALCulate[1|2]:LIMit:SEGMent[1|2|…12]:AMPLitude:STARt?

• CALCulate[1|2]:LIMit:SEGMent[1|2|…12]:AMPLitude:STOP

Other manuals for Agilent Technologies 8712ET