Programmer’s Guide 10-57
Menu Map with SCPI Commands
Menu Map for 8712ET/ES and 8714ET/ES
Table 10-24 SAVE RECALL Functions, 8712ET/ES and 8714ET/ES (3 of 5)
KEYSTROKES SCPI COMMAND
SAVE RECALL, programs, (continued)
Key Record on OFF (no SCPI command)
Utilities
1
(menu selection only)
Clear Program (no SCPI command)
Stack Size (no SCPI command)
Secure (no SCPI command)
IBASIC Display (menu selection only)
None DISP:PROG OFF
Full DISP:PROG FULL
Upper DISP:PROG UPP
Lower DISP:PROG LOW
Select Disk (menu selection only)
Non-Vol RAM Disk MMEM:MSIS ‘MEM:’
Volatile RAM Disk MMEM:MSIS ‘RAM:’
Internal 3.5” Disk MMEM:MSIS ‘INT:’
NFS Device (menu selection only)
Configure VOL_RAM (menu selection only)
Restore Defaults (no SCPI command)
Modify Size (no SCPI command)
Current Size (no SCPI command)
File Utilities (menu selection only)
Rename File (edit name,
press Enter)
MMEM:MOVE ‘<loc>:<name>’, ‘<loc>:<name>’
To Next Page
Loading...
