Agilent Technologies 8712ET

Programmer’s Guide 12-7
SCPI Conformance Information
SCPI Standard Commands
• PROGram[:SELected]:NUMBer?
• PROGram[:SELected]:STATe
• PROGram[:SELected]:STATe?
• PROGram[:SELected]:STRing
• PROGram[:SELected]:STRing?
• PROGram[:SELected]:WAIT
• PROGram[:SELected]:WAIT?
• SENSe[1|2]:AVERage:COUNt
• SENSe[1|2]:AVERage:COUNt?
• SENSe[1|2]:AVERage[:STATe]
• SENSe[1|2]:AVERage[:STATe]?
• SENSe[1|2]:BWIDth[:RESolution]
• SENSe[1|2]:BWIDth[:RESolution]?
• SENSe[1|2]:CORRection:COLLect[:ACQuire]
• SENSe[1|2]:CORRection:COLLect:METHod
• SENSe[1|2]:CORRection:COLLect:SAVE
• SENSe[1|2]:CORRection:CSET[:SELect]
• SENSe[1|2]:CORRection:CSET[:SELect]?
• SENSe[1|2]:CORRection:EDELay:TIME
• SENSe[1|2]:CORRection:IMPedance:INPut:MAGNitude
• SENSe[1|2]:CORRection:OFFSet:PHASe
• SENSe[1|2]:CORRection:RVELocity:COAX
• SENSe[1|2]:CORRection[:STATe]
• SENSe[1|2]:CORRection[:STATe]?
• SENSe[1|2]:DETector[:FUNCTION]
• SENSe[1|2]:FREQuency:CENTer
• SENSe[1|2]:FREQuency:CENTer?
• SENSe[1|2]:FREQuency:SPAN