Programmer’s Guide 12-19
SCPI Conformance Information
Instrument Specific Commands
• SENSe:FREQuency:SPAN:MAXimum (Option 100 only)
• SENSe:FREQuency:ZSTop (Option 100 only)
• SENSe:FREQuency:ZSTop? (Option 100 only)
• SENSe:FUNCtion:SRL:IMPedance (Option 100 only)
• SENSe:FUNCtion:SRL:IMPedance? (Option 100 only)
• SENSe:FUNCtion:SRL:MODE (Option 100 only)
• SENSe:FUNCtion:SRL:MODE? (Option 100 only)
• SENSe:FUNCtion:SRL:SCAN[:IMMediate] (Option 100 only)
• SENSe[1|2]:STATe
• SENSe[1|2]:STATe?
• SENSe:SWEep:TRIGger:SOURce
• SENSe:SWEep:TRIGger:SOURce?
• SENSe:WINDow[:TYPE] (Option 100 only)
• SENSe:WINDow[:TYPE]? (Option 100 only)
• STATus:DEVice:CONDition?
• STATus:DEVice:ENABle
• STATus:DEVice:ENABle?
• STATus:DEVice[:EVENt]?
• STATus:DEVice:NTRansition
• STATus:DEVice:NTRansition?
• STATus:DEVice:PTRansition
• STATus:DEVice:PTRansition?
• STATus:OPERation:AVERaging:CONDition?
• STATus:OPERation:AVERaging:ENABle
• STATus:OPERation:AVERaging:ENABle?
• STATus:OPERation:AVERaging[:EVENt]?
• STATus:OPERation:AVERaging:NTRansition
• STATus:OPERation:AVERaging:NTRansition?
To Next Page
Loading...
