Programmer’s Guide 13-7
SCPI Error Messages
Command Errors
−180 Macro error — This error, as well as errors −181 through −189, are
generated when defining or executing a macro. This particular error
message should be used if the device cannot detect a more specific error.
−181 Invalid outside macro definition — Indicates that a macro parameter
placeholder ($<number) was encountered outside of a macro definition.
−183 Invalid inside macro definition — Indicates that the program message unit
sequence, sent with a *DDT or *DMC command, is syntactically invalid.
−184 Macro parameter error — Indicates that a command inside the macro
definition had the wrong number or type of parameters.
Error
Number
Error Description
To Next Page
Loading...
