DISPlay Subsystem
l Sending DISPlay:TEXT <string> overrides the display state. You can display a message with the display disabled.
l While a message is displayed, information relating to the current instrument operation is not sent to the front-
panel display.
l The display text is unaffected by *RST. It is cleared at power-on.
DISPlay:TEXT:CLEar
Clears the text message from the front-panel display.
Parameter Typical Return
(none) (none)
Clear message on display:
DISP:TEXT:CLE
l l With DISPlay ON, DISP:TEXT:CLEar returns the display to its normal mode.
l With DISPlay OFF, DISP:TEXT:CLEar clears the message and the display remains disabled. To enable the display,
send DISPplay ON or press the front-panel Local key.
l The display text is unaffected by *RST. It is cleared at power-on.
Agilent 33500 Series Operating and Service Guide 195
To Next Page
Loading...
