Front-Panel Menu Reference
l Start/stop frequencies or center/span frequencies
l Dwell, hold, and return times
Configures burst parameters
l Burst on or off
l Burst mode: triggered (N Cycle) or externally-gated
l Cycles per burst (1 to 100,000,000 or infinite)
l Starting phase angle of burst (-360° to +360°)
l Burst period
Stores and recalls instrument states
l Store instrument states in non-volatile memory.
l Assign custom names to storage locations.
l Recall stored instrument states.
l Delete stored instrument states.
l Restore all instrument settings to their factory default values.
l Select the instrument’s power-on configuration (last power-down or factory default).
Agilent 33500 Series Operating and Service Guide 39
To Next Page
Loading...
