Front-Panel Menu Reference
Configures instrument I/O interfaces
l Turn LAN on and off
l Configure LAN (IP address and network configuration)
l Reset the LAN.
l Specify USB settings
l Select GPIB address
Configures instrument parameters
l Calibrate instrument
l Perform self-test
l Configure reference oscillator
l Clear instrument memory (NISPOM secure)
Configures system-related parameters
l Set screen layout
l Select local language for front-panel messages and help text
l Select how periods and commas are used in numbers on display
l Turn display on and off
l Enable or disable error beeper
l Enable or disable screen saver
l Adjust display brightness
l Install licensed features
40 Agilent 33500 Series Operating and Service Guide
To Next Page
Loading...
