44 Chapter2
Setting Up the EDGE (with GSM) Mode
Installing Optional Measurement Personalities
Available Personality Options
The option designation consists of three characters, as shown in the
Option column of the table below.
License Key Numbers
Measurement personalities purchased with your instrument have been
installed and enabled at the factory. You will receive a unique license
key number with every measurement personality purchased. The
license key number is a hexadecimal number that is for your specific
measurement personality and instrument serial number. It enables you
to install, or reactivate that particular personality.
Follow these steps to display the unique license key number for the
measurement personality that is installed in your instrument:
1. Press
System, Install, Choose Option. The Choose Option key accesses
the alpha editor. Use the alpha editor to enter letters (upper-case)
and the front-panel numeric keys to enter digits for a personality
option that is already installed in the instrument.
2. Press the
Done key on the alpha editor menu. The unique license key
number for your instrument will now appear on the
License Key
softkey.
Available Personality Options
a
Option
GSM measurement personality BAH
EDGE (with GSM) measurement personality
b
202
cdmaOne measurement personality BAC
NADC, PDC measurement personalities BAE
iDEN measurement personality HN1
W-CDMA measurement personality BAF
cdma2000 measurement personality B78
a. Available as of the print date of this guide.
b. For instruments that already have Option BAH licensed,
order E4406AU Option 252 to add EDGE (with GSM).
To Next Page
Loading...
Need help?
General
