94 Chapter3
Making EDGE (with GSM) Measurements
Making the Waveform (Time Domain) Measurement
Changing the Measurement Setup
NOTE Parameters that are under the Advanced key seldom need to be
changed. Any changes from the default values may result in invalid
measurement data.
Table 2 Waveform (Time Domain) Measurement Defaults
Measurement Parameter Factory Default Condition
View/Trace RF Envelope
Sweep Time
Res BW
Averaging:
Avg Number
Avg Mode
Avg Type
10 Off
Exp
Pwr Avg (RMS)
Trigger Source
RF Envelope Window:
Amplitude Y Scale
Scale/Div
Reference
10.00 dB
0.00 dBm (Top)
I/Q Waveform Window:
Amplitude Y Scale
Scale/Div
Reference
100.0 mv
0.00 V (Ctr)
Advanced
Pre-ADC BPF Off
RBW Filter Gaussian
ADC Range Auto
Data Packing Auto
ADC Dither Off
Decimation Off
To Next Page
Loading...
Need help?
General
