4-22 Chapter4
Troubleshooting
Error Message Format
Error Message Format
The system–defined error numbers are chosen on an enumerated (“1 of
N”) basis. The error messages are listed in alphabetical order within
each error message type section.
In this chapter, an explanation is included with each error to further
clarify its meaning. The last error described in each class (for example,
–400, –300, –200, –100) is a “generic” error. There are also references to
the IEEE Standard 488.2-1992, IEEE Standard Codes, Formats,
Protocols and Common Commands for Use with ANSI/IEEE Std
488.1-1987. New York, NY, 1992.
Error messages are displayed at the bottom of the screen in the status
line (yellow on color displays).
To Next Page
Loading...
Need help?
General
