Chapter 7 7-9
Options and Accessories
How to Order Options
AUX VIDEO OUT - provides detected video output (before the
analog-to-digital conversion) proportional to vertical deflection of the
trace.
AUX IF OUT - provides a 50 Ω, 21.4 MHz IF output that is the
down-converted signal of the RF input of the analyzer.
External Mixing (Option AYZ)
Option AYZ allows the use of HP/Agilent 11970 Series, and HP/Agilent
11974 external mixers with the Agilent E4407B analyzer to extend the
frequency range to 110 GHz. Operation to 325 GHz is also possible with
non-HP/Agilent mixers.
Benchlink Spectrum Analyzer (Option B70)
Option B70 provides the Benchlink Spectrum Analyzer software which
can be used to capture screen images and trace data using a personal
computer (PC). The captured information can then be used in other PC
applications, including word processing and spread sheets.
Enhanced Memory Upgrade (Option B72)
Option B72 provides 2 SIMMS which increases the analyzer’s RAM to
32 MBytes and its flash or data storage memory to 16 MBytes
(10 MBytes of which are available to the user for data storage).
RF and Digital Communications Hardware
(Option B74)
Option B74 includes the RF Communications Hardware (Option B7E),
Digital Signal Processing and Fast ADC (Option B7D), Time-Gated
Spectrum Analysis (Option 1D6), Memory Extension (Option B72),
High Stability Frequency Reference (Option 1D5), Preamplifier (Option
1DS), and Narrow Resolution Bandwidth (Option 1DR) assemblies.
These assemblies are required for optimum performance of the
cdmaOne (Option BAC) or GSM measurement personality
(Option BAH).
Performance Bundle (Option B75)
Option B75 provides the pre-amplifier, narrow resolution bandwidths,
and high stability frequency reference. Refer to Options 1DS, 1DR, and
1D5 for details.
This option is only available at time of purchase.
To Next Page
Loading...
Need help?
General
