Agilent Technologies E4417A - Replacing the Rear Panel Power Reference Cable Assembly (Option 003)

Replaceable Parts 5
E4416A/E4417A Power Meters Service Guide 111
Replacing the Rear Panel Power Reference Cable Assembly
(Option 003)
1 Disassemble the power meter down to allow access to the rear panel
connectors. (Refer to “Removing the A4 Comms Assembly” on page 99 for
further information).
2 Replace the power reference cable assembly using the replacement kit and
the torques indicated on the following diagrams:
25 lb/in
6 lb/in
tie wraps
9 lb/in
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com