5Replaceable Parts
112 E4416A/E4417A Power Meters Service Guide
Replacing the Rear Panel Recorder Output(s) Cable
Assembly
1 Disassemble the power meter down to allow access to the rear panel
connectors. (Refer to “Removing the A4 Comms Assembly” on page 99 for
further information).
2 Replace the recorder output cable assembly using the replacement kit and
the torque indicated on the following diagram:
Recorder output A connects to A4 J23 and recorder output B connects to A4 J24.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
