1 Specifications
8 E4416A/E4417A Power Meters Service Guide
Measurement Characteristics
• Measurements: Average Power.
Peak Power.
Peak- to- Average ratio. Measurements between
two time offsets (time gating).
• Averaging: Averaging over 1 to 1024 readings is available for
reducing noise.
• Measurement Speed
(GPIB):
Over the GPIB, three measurement modes are
available - Normal, X2 and Fast. The typical
maximum speed for each mode is shown in the
following table:
Sensor Type
Measurement Speed
(readings per second)
Normal x
1
Fast
1,2
E-Series E9320 peak and average
sensors
Average-only mode 20 40 400
Normal mode
3
20 40 1000
E-Series E4410 and E-Series E9300 average power sensors 20 40 400
8480 Series power sensors 20 40 N.A.
N8480 Series power sensors 20 40 N.A.
1 Fast speed not available for 8480 Series and N8480 Series sensors.
2 Maximum measurement speed is obtained by using binary output in free run trigger mode.
3 For E-Series E9320 sensors maximum speed is achieved using binary output in free run acquisition.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
