Agilent Technologies E4416A/E4417A Power Meters Service Guide iii
Certification
Agilent Technologies certifies that this product met its
published specifications at the time of shipment from the
factory. Agilent Technologies further certifies that its
calibration measurements are traceable to the United States
National Institute of Standards and Technology, to the extent
allowed by the Institute’s calibration facility, and to the
calibration facilities of other International Standards
Organization members.
Warranty
This Agilent Technologies instrument product is warranted
against defects in material and workmanship for a period of one
year from date of shipment. During the warranty period, Agilent
Technologies will at its option, either repair or replace products
which prove to be defective. For warranty service or repair, this
product must be returned to a service facility designated by
Agilent Technologies. Buyer shall prepay shipping charges to
Agilent Technologies and Agilent Technologies shall pay
shipping charges, duties, and taxes for products returned to
Aglent Technologies from another country. Agilent
Technologies warrants that its software and firmware
designated by Agilent Technologies for use with an instrument
will execute its programming instructions when properly
installed on that instrument. Agilent Technologies does not
warrant that the operation of the instrument, or firmware will
be uninterrupted or error free.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
