Agilent 1260 Infinity VWD User Manual 101
Error Information
7
Detector Error Messages
Cover Violation
Error ID: 7461
The top foam has been removed.
The sensor on the main board detects when the top foam is in place. If
the foam is removed while the lamps are on (or if an attempt is made to
switch on for example the lamps with the foam removed), the lamps are
switched off, and the error message is generated.
Probable cause Suggested actions
1 The top foam was removed during
operation.
Please contact your Agilent service
representative.
2 Foam not activating the sensor.
Please contact your Agilent service
representative.
To Next Page
Loading...
Need help?
General
