10 Agilent 1260 Infinity VWD User Manual
1 Introduction to the Variable Wavelength Detector
Introduction to the Detector
Introduction to the Detector
The Agilent 1260 Infinity variable wavelength detector is designed for
highest optical performance, GLP compliance and easy maintenance with:
• data rate up to , see “Peakwidth Settings” on page 71,
• 13 Hz for standard HPLC with G1314B VWD VL,
• 55 Hz for fast- HPLC G1314C VWD VL+,
• deuterium lamp for highest intensity and lowest detection limit over a
wavelength range of 190 to 600 nm,
• optional flow- cell cartridges (standard (10 mm, 14 µL), high pressure
(10 mm, 14 µL), micro (5 mm, 1 µL), semi- micro (6 mm, 5 µL)) are
available and can be used depending on the application needs,
• easy front access to lamp and flow cell for fast replacement, and
• built- in holmium oxide filter for fast wavelength accuracy verification.
For specifications refer to Table 4 on page 27.
Two version of the Agilent 1260 Infinity variable wavelength detector are
available:
G1314B Agilent 1260 Infinity Variable Wavelength Detector VL
G1314C Agilent 1260 Infinity Variable Wavelength Detector VL+ high data rates for
fast HPLC
To Next Page
Need help?
General
