Agilent Technologies G1314B - Two Stack Configuration

Agilent 1260 Infinity VWD User Manual 37
Installing the Detector
3
Optimizing the Stack Configuration
Two Stack Configuration
To avoid excessive height of the stack when the autosampler thermostat is
added to the system it is recommended to form two stacks. Some users
prefer the lower height of this arrangement even without the autosampler
thermostat. A slightly longer capillary is required between the pump and
autosampler. (See Figure 7 on page 37 and Figure 8 on page 38).
Figure 7 Recommended Two Stack Configuration for 1260 Infinity (Front View)
>chiVciE^adi
9ZiZXidg
8dajbcXdbeVgibZci
HdakZciXVW^cZi
9Z\VhhZgdei^dcVa
Ejbe
I]ZgbdhiVi[dgi]Z6AH$;gVXi^dcXdaaZXidgdei^dcVa
6jidhVbeaZg6AH$;gVXi^dcXdaaZXidg