Agilent Technologies G1314B - Page 171

Agilent 1260 Infinity VWD User Manual 171
Hardware Information
12
Optional Interface Boards
The following cards can be used with the Agilent 1260 Infinity modules.
Recommended LAN Cables
NOTE
One board is required per Agilent 1260 Infinity instrument. It is recommended to add the
LAN board to the detector with highest data rate.
NOTE
For the configuration of the G1369 LAN Communication Interface card refer to its
documentation.
Tabl e 16 LAN Boards
Type Vendor Supported networks
Interface board (LAN) (G1369B
or G1369-60002) or
Interface board (LAN) (G1369C
or G1369-60012)
Agilent Technologies Fast Ethernet, Ethernet/802.3,
RJ-45 (10/100Base-TX)
recommended for re-ordering
LAN Communication Interface
board (G1369A or
G1369-60001)
Agilent Technologies Fast Ethernet, Ethernet/802.3,
RJ-45 (10/100Base-TX)
(obsolete)
J4106A
1
1
These cards may be no longer orderable. Minimum firmware of these Hewlett Packard JetDirect
cards is A.05.05.
Hewlett Packard Ethernet/802.3, RJ-45
(10Base-T)
J4105A
1
Hewlett Packard Token Ring/802.5, DB9, RJ-45
(10Base-T)
J4100A
1
Hewlett Packard Fast Ethernet, Ethernet/802.3,
RJ-45 (10/100Base-TX) + BNC
(10Base2)
p/n Description
5023-0203 Cross-over network cable, shielded, 3 m (for point to point connection)
5023-0202 Twisted pair network cable, shielded, 7 m (for point to point connection)