1260 Infinity II Flexible Pump User Manual 75
3Using the Module
Setting up the Pump with the Instrument Control Interface
Context Menu
The context menu of the dashboard panel contains the following commands:
Control Displays the pump's Control dialog box.
Method Displays the pump's Method Setup dialog box.
Set Error Method Sets the method that is loaded if an error occurs to the method
that is currently available in the hardware.
Identify Device Causes the LED on the front of the module to blink for a few
seconds.
Switch Pump On/Off Toggles the status of the pump, on or off.
Bottle Fillings Displays the Bottle Fillings dialog box.
Prepare Pump... Displays the Prepare Pump dialog box.
Flush Filter On/Off Allows you to flush a clogged inline filter, which is connected to
the Multipurpose Valve, see “Filter Flush Mode” on page 19. Use
the pump self-test for checking the filter back pressure. Do not
use this option if no filter is installed!
To Next Page
Loading...
Need help?
General
