Agilent Technologies Intuvo 9000 - BCD Cable, G1530-61100

110 Agilent Intuvo 9000 GC Installation
B Cabling Diagrams and Remote Start/Stop
When used for BCD input, apply label G1580-87100 to identify
the cable for BCD use.
BCD cable, G1530-61100
The BCD cable connector has eight passive inputs that sense
total binary-coded decimal levels. The pin assignments for this
connector are listed in Table 12.
7MS digit 0
8Ground
Shield Chassis ground
Table 11 BCD input connections
Pin Function Maximum rating
Table 12 BCD cable connections
Connector 1 Pin Connector 2 Pin Ribbon Cable Wire Color
1Brown
2Red
13Orange
4Yellow
2
8
1
6
1
26